Primitive Type str

String slices.

See also the std::str module.

The str type, also called a 'string slice', is the most primitive string type. It is usually seen in its borrowed form, &str. It is also the type of string literals, &'static str.

String slices are always valid UTF-8.

Examples

String literals are string slices:

let hello = "Hello, world!";

// with an explicit type annotation
let hello: &'static str = "Hello, world!";

They are 'static because they're stored directly in the final binary, and so will be valid for the 'static duration.

Representation

A &str is made up of two components: a pointer to some bytes, and a length. You can look at these with the as_ptr and len methods:

use std::slice;
use std::str;

let story = "Once upon a time...";

let ptr = story.as_ptr();
let len = story.len();

// story has nineteen bytes
assert_eq!(19, len);

// We can re-build a str out of ptr and len. This is all unsafe because
// we are responsible for making sure the two components are valid:
let s = unsafe {
    // First, we build a &[u8]...
    let slice = slice::from_raw_parts(ptr, len);

    // ... and then convert that slice into a string slice
    str::from_utf8(slice)
};

assert_eq!(s, Ok(story));

Note: This example shows the internals of &str. unsafe should not be used to get a string slice under normal circumstances. Use as_str instead.

Methods

impl str

pub fn len(&self) -> usize

Returns the length of self.

This length is in bytes, not chars or graphemes. In other words, it may not be what a human considers the length of the string.

Examples

Basic usage:

let len = "foo".len();
assert_eq!(3, len);

let len = "ƒoo".len(); // fancy f!
assert_eq!(4, len);

pub fn is_empty(&self) -> bool

Returns true if self has a length of zero bytes.

Examples

Basic usage:

let s = "";
assert!(s.is_empty());

let s = "not empty";
assert!(!s.is_empty());

pub fn is_char_boundary(&self, index: usize) -> bool

Checks that index-th byte lies at the start and/or end of a UTF-8 code point sequence.

The start and end of the string (when index == self.len()) are considered to be boundaries.

Returns false if index is greater than self.len().

Examples

let s = "Löwe 老虎 Léopard";
assert!(s.is_char_boundary(0));
// start of `老`
assert!(s.is_char_boundary(6));
assert!(s.is_char_boundary(s.len()));

// second byte of `ö`
assert!(!s.is_char_boundary(2));

// third byte of `老`
assert!(!s.is_char_boundary(8));

Important traits for &'_ [u8]

impl<'_> Read for &'_ [u8]impl<'_> Write for &'_ mut [u8]

pub fn as_bytes(&self) -> &[u8]

Converts a string slice to a byte slice. To convert the byte slice back into a string slice, use the str::from_utf8 function.

Examples

Basic usage:

let bytes = "bors".as_bytes();
assert_eq!(b"bors", bytes);

Important traits for &'_ [u8]

impl<'_> Read for &'_ [u8]impl<'_> Write for &'_ mut [u8]

pub unsafe fn as_bytes_mut(&mut self) -> &mut [u8]

Converts a mutable string slice to a mutable byte slice. To convert the mutable byte slice back into a mutable string slice, use the str::from_utf8_mut function.

Examples

Basic usage:

let mut s = String::from("Hello");
let bytes = unsafe { s.as_bytes_mut() };

assert_eq!(b"Hello", bytes);

Mutability:

let mut s = String::from("🗻∈🌏");

unsafe {
    let bytes = s.as_bytes_mut();

    bytes[0] = 0xF0;
    bytes[1] = 0x9F;
    bytes[2] = 0x8D;
    bytes[3] = 0x94;
}

assert_eq!("🍔∈🌏", s);

pub const fn as_ptr(&self) -> *const u8

Converts a string slice to a raw pointer.

As string slices are a slice of bytes, the raw pointer points to a u8. This pointer will be pointing to the first byte of the string slice.

The caller must ensure that the returned pointer is never written to. If you need to mutate the contents of the string slice, use as_mut_ptr.

Examples

Basic usage:

let s = "Hello";
let ptr = s.as_ptr();

pub fn as_mut_ptr(&mut self) -> *mut u8

Converts a mutable string slice to a raw pointer.

As string slices are a slice of bytes, the raw pointer points to a u8. This pointer will be pointing to the first byte of the string slice.

It is your responsibility to make sure that the string slice only gets modified in a way that it remains valid UTF-8.

pub fn get<I>(&self, i: I) -> Option<&<I as SliceIndex<str>>::Output> where
    I: SliceIndex<str>, 

Returns a subslice of str.

This is the non-panicking alternative to indexing the str. Returns None whenever equivalent indexing operation would panic.

Examples

let v = String::from("🗻∈🌏");

assert_eq!(Some("🗻"), v.get(0..4));

// indices not on UTF-8 sequence boundaries
assert!(v.get(1..).is_none());
assert!(v.get(..8).is_none());

// out of bounds
assert!(v.get(..42).is_none());

pub fn get_mut<I>(
    &mut self,
    i: I
) -> Option<&mut <I as SliceIndex<str>>::Output> where
    I: SliceIndex<str>, 

Returns a mutable subslice of str.

This is the non-panicking alternative to indexing the str. Returns None whenever equivalent indexing operation would panic.

Examples

let mut v = String::from("hello");
// correct length
assert!(v.get_mut(0..5).is_some());
// out of bounds
assert!(v.get_mut(..42).is_none());
assert_eq!(Some("he"), v.get_mut(0..2).map(|v| &*v));

assert_eq!("hello", v);
{
    let s = v.get_mut(0..2);
    let s = s.map(|s| {
        s.make_ascii_uppercase();
        &*s
    });
    assert_eq!(Some("HE"), s);
}
assert_eq!("HEllo", v);

pub unsafe fn get_unchecked<I>(&self, i: I) -> &<I as SliceIndex<str>>::Output where
    I: SliceIndex<str>, 

Returns a unchecked subslice of str.

This is the unchecked alternative to indexing the str.

Safety

Callers of this function are responsible that these preconditions are satisfied:

• The starting index must come before the ending index;
• Indexes must be within bounds of the original slice;
• Indexes must lie on UTF-8 sequence boundaries.

Failing that, the returned string slice may reference invalid memory or violate the invariants communicated by the str type.

Examples

let v = "🗻∈🌏";
unsafe {
    assert_eq!("🗻", v.get_unchecked(0..4));
    assert_eq!("∈", v.get_unchecked(4..7));
    assert_eq!("🌏", v.get_unchecked(7..11));
}

pub unsafe fn get_unchecked_mut<I>(
    &mut self,
    i: I
) -> &mut <I as SliceIndex<str>>::Output where
    I: SliceIndex<str>, 

Returns a mutable, unchecked subslice of str.

This is the unchecked alternative to indexing the str.

Safety

Callers of this function are responsible that these preconditions are satisfied:

• The starting index must come before the ending index;
• Indexes must be within bounds of the original slice;
• Indexes must lie on UTF-8 sequence boundaries.

Failing that, the returned string slice may reference invalid memory or violate the invariants communicated by the str type.

Examples

let mut v = String::from("🗻∈🌏");
unsafe {
    assert_eq!("🗻", v.get_unchecked_mut(0..4));
    assert_eq!("∈", v.get_unchecked_mut(4..7));
    assert_eq!("🌏", v.get_unchecked_mut(7..11));
}

pub unsafe fn slice_unchecked(&self, begin: usize, end: usize) -> &str

Deprecated since 1.29.0:

use get_unchecked(begin..end) instead

Creates a string slice from another string slice, bypassing safety checks.

This is generally not recommended, use with caution! For a safe alternative see str and Index.

This new slice goes from begin to end, including begin but excluding end.

To get a mutable string slice instead, see the slice_mut_unchecked method.

Safety

Callers of this function are responsible that three preconditions are satisfied:

• begin must come before end.
• begin and end must be byte positions within the string slice.
• begin and end must lie on UTF-8 sequence boundaries.

Examples

Basic usage:

let s = "Löwe 老虎 Léopard";

unsafe {
    assert_eq!("Löwe 老虎 Léopard", s.slice_unchecked(0, 21));
}

let s = "Hello, world!";

unsafe {
    assert_eq!("world", s.slice_unchecked(7, 12));
}

pub unsafe fn slice_mut_unchecked(
    &mut self,
    begin: usize,
    end: usize
) -> &mut str

Deprecated since 1.29.0:

use get_unchecked_mut(begin..end) instead

Creates a string slice from another string slice, bypassing safety checks. This is generally not recommended, use with caution! For a safe alternative see str and IndexMut.

This new slice goes from begin to end, including begin but excluding end.

To get an immutable string slice instead, see the slice_unchecked method.

Safety

Callers of this function are responsible that three preconditions are satisfied:

• begin must come before end.
• begin and end must be byte positions within the string slice.
• begin and end must lie on UTF-8 sequence boundaries.

pub fn split_at(&self, mid: usize) -> (&str, &str)

Divide one string slice into two at an index.

The argument, mid, should be a byte offset from the start of the string. It must also be on the boundary of a UTF-8 code point.

The two slices returned go from the start of the string slice to mid, and from mid to the end of the string slice.

To get mutable string slices instead, see the split_at_mut method.

Panics

Panics if mid is not on a UTF-8 code point boundary, or if it is beyond the last code point of the string slice.

Examples

Basic usage:

let s = "Per Martin-Löf";

let (first, last) = s.split_at(3);

assert_eq!("Per", first);
assert_eq!(" Martin-Löf", last);

pub fn split_at_mut(&mut self, mid: usize) -> (&mut str, &mut str)

Divide one mutable string slice into two at an index.

The argument, mid, should be a byte offset from the start of the string. It must also be on the boundary of a UTF-8 code point.

The two slices returned go from the start of the string slice to mid, and from mid to the end of the string slice.

To get immutable string slices instead, see the split_at method.

Panics

Panics if mid is not on a UTF-8 code point boundary, or if it is beyond the last code point of the string slice.

Examples

Basic usage:

let mut s = "Per Martin-Löf".to_string();
{
    let (first, last) = s.split_at_mut(3);
    first.make_ascii_uppercase();
    assert_eq!("PER", first);
    assert_eq!(" Martin-Löf", last);
}
assert_eq!("PER Martin-Löf", s);

Important traits for Chars<'a>

impl<'a> Iterator for Chars<'a> type Item = char;

pub fn chars(&self) -> Chars

Returns an iterator over the chars of a string slice.

As a string slice consists of valid UTF-8, we can iterate through a string slice by char. This method returns such an iterator.

It's important to remember that char represents a Unicode Scalar Value, and may not match your idea of what a 'character' is. Iteration over grapheme clusters may be what you actually want.

Examples

Basic usage:

let word = "goodbye";

let count = word.chars().count();
assert_eq!(7, count);

let mut chars = word.chars();

assert_eq!(Some('g'), chars.next());
assert_eq!(Some('o'), chars.next());
assert_eq!(Some('o'), chars.next());
assert_eq!(Some('d'), chars.next());
assert_eq!(Some('b'), chars.next());
assert_eq!(Some('y'), chars.next());
assert_eq!(Some('e'), chars.next());

assert_eq!(None, chars.next());

Remember, chars may not match your human intuition about characters:

let y = "y̆";

let mut chars = y.chars();

assert_eq!(Some('y'), chars.next()); // not 'y̆'
assert_eq!(Some('\u{0306}'), chars.next());

assert_eq!(None, chars.next());

Important traits for CharIndices<'a>

impl<'a> Iterator for CharIndices<'a> type Item = (usize, char);

pub fn char_indices(&self) -> CharIndices

Returns an iterator over the chars of a string slice, and their positions.

As a string slice consists of valid UTF-8, we can iterate through a string slice by char. This method returns an iterator of both these chars, as well as their byte positions.

The iterator yields tuples. The position is first, the char is second.

Examples

Basic usage:

let word = "goodbye";

let count = word.char_indices().count();
assert_eq!(7, count);

let mut char_indices = word.char_indices();

assert_eq!(Some((0, 'g')), char_indices.next());
assert_eq!(Some((1, 'o')), char_indices.next());
assert_eq!(Some((2, 'o')), char_indices.next());
assert_eq!(Some((3, 'd')), char_indices.next());
assert_eq!(Some((4, 'b')), char_indices.next());
assert_eq!(Some((5, 'y')), char_indices.next());
assert_eq!(Some((6, 'e')), char_indices.next());

assert_eq!(None, char_indices.next());

Remember, chars may not match your human intuition about characters:

let yes = "y̆es";

let mut char_indices = yes.char_indices();

assert_eq!(Some((0, 'y')), char_indices.next()); // not (0, 'y̆')
assert_eq!(Some((1, '\u{0306}')), char_indices.next());

// note the 3 here - the last character took up two bytes
assert_eq!(Some((3, 'e')), char_indices.next());
assert_eq!(Some((4, 's')), char_indices.next());

assert_eq!(None, char_indices.next());

Important traits for Bytes<'_>

impl<'_> Iterator for Bytes<'_> type Item = u8;

pub fn bytes(&self) -> Bytes

An iterator over the bytes of a string slice.

As a string slice consists of a sequence of bytes, we can iterate through a string slice by byte. This method returns such an iterator.

Examples

Basic usage:

let mut bytes = "bors".bytes();

assert_eq!(Some(b'b'), bytes.next());
assert_eq!(Some(b'o'), bytes.next());
assert_eq!(Some(b'r'), bytes.next());
assert_eq!(Some(b's'), bytes.next());

assert_eq!(None, bytes.next());

Important traits for SplitWhitespace<'a>

impl<'a> Iterator for SplitWhitespace<'a> type Item = &'a str;

pub fn split_whitespace(&self) -> SplitWhitespace

Splits a string slice by whitespace.

The iterator returned will return string slices that are sub-slices of the original string slice, separated by any amount of whitespace.

'Whitespace' is defined according to the terms of the Unicode Derived Core Property White_Space. If you only want to split on ASCII whitespace instead, use split_ascii_whitespace.

Examples

Basic usage:

let mut iter = "A few words".split_whitespace();

assert_eq!(Some("A"), iter.next());
assert_eq!(Some("few"), iter.next());
assert_eq!(Some("words"), iter.next());

assert_eq!(None, iter.next());

All kinds of whitespace are considered:

let mut iter = " Mary   had\ta\u{2009}little  \n\t lamb".split_whitespace();
assert_eq!(Some("Mary"), iter.next());
assert_eq!(Some("had"), iter.next());
assert_eq!(Some("a"), iter.next());
assert_eq!(Some("little"), iter.next());
assert_eq!(Some("lamb"), iter.next());

assert_eq!(None, iter.next());

Important traits for SplitAsciiWhitespace<'a>

impl<'a> Iterator for SplitAsciiWhitespace<'a> type Item = &'a str;

pub fn split_ascii_whitespace(&self) -> SplitAsciiWhitespace

Splits a string slice by ASCII whitespace.

The iterator returned will return string slices that are sub-slices of the original string slice, separated by any amount of ASCII whitespace.

To split by Unicode Whitespace instead, use split_whitespace.

Examples

Basic usage:

let mut iter = "A few words".split_ascii_whitespace();

assert_eq!(Some("A"), iter.next());
assert_eq!(Some("few"), iter.next());
assert_eq!(Some("words"), iter.next());

assert_eq!(None, iter.next());

All kinds of ASCII whitespace are considered:

let mut iter = " Mary   had\ta little  \n\t lamb".split_ascii_whitespace();
assert_eq!(Some("Mary"), iter.next());
assert_eq!(Some("had"), iter.next());
assert_eq!(Some("a"), iter.next());
assert_eq!(Some("little"), iter.next());
assert_eq!(Some("lamb"), iter.next());

assert_eq!(None, iter.next());

Important traits for Lines<'a>

impl<'a> Iterator for Lines<'a> type Item = &'a str;

pub fn lines(&self) -> Lines

An iterator over the lines of a string, as string slices.

Lines are ended with either a newline (\n) or a carriage return with a line feed (\r\n).

The final line ending is optional.

Examples

Basic usage:

let text = "foo\r\nbar\n\nbaz\n";
let mut lines = text.lines();

assert_eq!(Some("foo"), lines.next());
assert_eq!(Some("bar"), lines.next());
assert_eq!(Some(""), lines.next());
assert_eq!(Some("baz"), lines.next());

assert_eq!(None, lines.next());

The final line ending isn't required:

let text = "foo\nbar\n\r\nbaz";
let mut lines = text.lines();

assert_eq!(Some("foo"), lines.next());
assert_eq!(Some("bar"), lines.next());
assert_eq!(Some(""), lines.next());
assert_eq!(Some("baz"), lines.next());

assert_eq!(None, lines.next());

Important traits for LinesAny<'a>

impl<'a> Iterator for LinesAny<'a> type Item = &'a str;

pub fn lines_any(&self) -> LinesAny

Deprecated since 1.4.0:

use lines() instead now

An iterator over the lines of a string.

Important traits for EncodeUtf16<'a>

impl<'a> Iterator for EncodeUtf16<'a> type Item = u16;

pub fn encode_utf16(&self) -> EncodeUtf16

Returns an iterator of u16 over the string encoded as UTF-16.

Examples

Basic usage:

let text = "Zażółć gęślą jaźń";

let utf8_len = text.len();
let utf16_len = text.encode_utf16().count();

assert!(utf16_len <= utf8_len);

pub fn contains<'a, P>(&'a self, pat: P) -> bool where
    P: Pattern<'a>, 

Returns true if the given pattern matches a sub-slice of this string slice.

Returns false if it does not.

Examples

Basic usage:

let bananas = "bananas";

assert!(bananas.contains("nana"));
assert!(!bananas.contains("apples"));

pub fn starts_with<'a, P>(&'a self, pat: P) -> bool where
    P: Pattern<'a>, 

Returns true if the given pattern matches a prefix of this string slice.

Returns false if it does not.

Examples

Basic usage:

let bananas = "bananas";

assert!(bananas.starts_with("bana"));
assert!(!bananas.starts_with("nana"));

pub fn ends_with<'a, P>(&'a self, pat: P) -> bool where
    P: Pattern<'a>,
    <P as Pattern<'a>>::Searcher: ReverseSearcher<'a>, 

Returns true if the given pattern matches a suffix of this string slice.

Returns false if it does not.

Examples

Basic usage:

let bananas = "bananas";

assert!(bananas.ends_with("anas"));
assert!(!bananas.ends_with("nana"));

pub fn find<'a, P>(&'a self, pat: P) -> Option<usize> where
    P: Pattern<'a>, 

Returns the byte index of the first character of this string slice that matches the pattern.

Returns None if the pattern doesn't match.

The pattern can be a &str, char, or a closure that determines if a character matches.

Examples

Simple patterns:

let s = "Löwe 老虎 Léopard";

assert_eq!(s.find('L'), Some(0));
assert_eq!(s.find('é'), Some(14));
assert_eq!(s.find("Léopard"), Some(13));

More complex patterns using point-free style and closures:

let s = "Löwe 老虎 Léopard";

assert_eq!(s.find(char::is_whitespace), Some(5));
assert_eq!(s.find(char::is_lowercase), Some(1));
assert_eq!(s.find(|c: char| c.is_whitespace() || c.is_lowercase()), Some(1));
assert_eq!(s.find(|c: char| (c < 'o') && (c > 'a')), Some(4));

Not finding the pattern:

let s = "Löwe 老虎 Léopard";
let x: &[_] = &['1', '2'];

assert_eq!(s.find(x), None);

pub fn rfind<'a, P>(&'a self, pat: P) -> Option<usize> where
    P: Pattern<'a>,
    <P as Pattern<'a>>::Searcher: ReverseSearcher<'a>, 

Returns the byte index of the last character of this string slice that matches the pattern.

Returns None if the pattern doesn't match.

The pattern can be a &str, char, or a closure that determines if a character matches.

Examples

Simple patterns:

let s = "Löwe 老虎 Léopard";

assert_eq!(s.rfind('L'), Some(13));
assert_eq!(s.rfind('é'), Some(14));

More complex patterns with closures:

let s = "Löwe 老虎 Léopard";

assert_eq!(s.rfind(char::is_whitespace), Some(12));
assert_eq!(s.rfind(char::is_lowercase), Some(20));

Not finding the pattern:

let s = "Löwe 老虎 Léopard";
let x: &[_] = &['1', '2'];

assert_eq!(s.rfind(x), None);

Important traits for Split<'a, P>

impl<'a, P> Iterator for Split<'a, P> where
    P: Pattern<'a>,  type Item = &'a str;

pub fn split<'a, P>(&'a self, pat: P) -> Split<'a, P> where
    P: Pattern<'a>, 

An iterator over substrings of this string slice, separated by characters matched by a pattern.

The pattern can be any type that implements the Pattern trait. Notable examples are &str, char, and closures that determines the split.

Iterator behavior

The returned iterator will be a DoubleEndedIterator if the pattern allows a reverse search and forward/reverse search yields the same elements. This is true for, e.g., char, but not for &str.

If the pattern allows a reverse search but its results might differ from a forward search, the rsplit method can be used.

Examples

Simple patterns:

let v: Vec<&str> = "Mary had a little lamb".split(' ').collect();
assert_eq!(v, ["Mary", "had", "a", "little", "lamb"]);

let v: Vec<&str> = "".split('X').collect();
assert_eq!(v, [""]);

let v: Vec<&str> = "lionXXtigerXleopard".split('X').collect();
assert_eq!(v, ["lion", "", "tiger", "leopard"]);

let v: Vec<&str> = "lion::tiger::leopard".split("::").collect();
assert_eq!(v, ["lion", "tiger", "leopard"]);

let v: Vec<&str> = "abc1def2ghi".split(char::is_numeric).collect();
assert_eq!(v, ["abc", "def", "ghi"]);

let v: Vec<&str> = "lionXtigerXleopard".split(char::is_uppercase).collect();
assert_eq!(v, ["lion", "tiger", "leopard"]);

A more complex pattern, using a closure:

let v: Vec<&str> = "abc1defXghi".split(|c| c == '1' || c == 'X').collect();
assert_eq!(v, ["abc", "def", "ghi"]);

If a string contains multiple contiguous separators, you will end up with empty strings in the output:

let x = "||||a||b|c".to_string();
let d: Vec<_> = x.split('|').collect();

assert_eq!(d, &["", "", "", "", "a", "", "b", "c"]);

Contiguous separators are separated by the empty string.

let x = "(///)".to_string();
let d: Vec<_> = x.split('/').collect();

assert_eq!(d, &["(", "", "", ")"]);

Separators at the start or end of a string are neighbored by empty strings.

let d: Vec<_> = "010".split("0").collect();
assert_eq!(d, &["", "1", ""]);

When the empty string is used as a separator, it separates every character in the string, along with the beginning and end of the string.

let f: Vec<_> = "rust".split("").collect();
assert_eq!(f, &["", "r", "u", "s", "t", ""]);

Contiguous separators can lead to possibly surprising behavior when whitespace is used as the separator. This code is correct:

let x = "    a  b c".to_string();
let d: Vec<_> = x.split(' ').collect();

assert_eq!(d, &["", "", "", "", "a", "", "b", "c"]);

It does not give you:

assert_eq!(d, &["a", "b", "c"]);

Use split_whitespace for this behavior.

Important traits for RSplit<'a, P>

impl<'a, P> Iterator for RSplit<'a, P> where
    P: Pattern<'a>,
    <P as Pattern<'a>>::Searcher: ReverseSearcher<'a>,  type Item = &'a str;

pub fn rsplit<'a, P>(&'a self, pat: P) -> RSplit<'a, P> where
    P: Pattern<'a>,
    <P as Pattern<'a>>::Searcher: ReverseSearcher<'a>, 

An iterator over substrings of the given string slice, separated by characters matched by a pattern and yielded in reverse order.

The pattern can be any type that implements the Pattern trait. Notable examples are &str, char, and closures that determines the split.

Iterator behavior

The returned iterator requires that the pattern supports a reverse search, and it will be a DoubleEndedIterator if a forward/reverse search yields the same elements.

For iterating from the front, the split method can be used.

Examples

Simple patterns:

let v: Vec<&str> = "Mary had a little lamb".rsplit(' ').collect();
assert_eq!(v, ["lamb", "little", "a", "had", "Mary"]);

let v: Vec<&str> = "".rsplit('X').collect();
assert_eq!(v, [""]);

let v: Vec<&str> = "lionXXtigerXleopard".rsplit('X').collect();
assert_eq!(v, ["leopard", "tiger", "", "lion"]);

let v: Vec<&str> = "lion::tiger::leopard".rsplit("::").collect();
assert_eq!(v, ["leopard", "tiger", "lion"]);

A more complex pattern, using a closure:

let v: Vec<&str> = "abc1defXghi".rsplit(|c| c == '1' || c == 'X').collect();
assert_eq!(v, ["ghi", "def", "abc"]);

Important traits for SplitTerminator<'a, P>

impl<'a, P> Iterator for SplitTerminator<'a, P> where
    P: Pattern<'a>,  type Item = &'a str;

pub fn split_terminator<'a, P>(&'a self, pat: P) -> SplitTerminator<'a, P> where
    P: Pattern<'a>, 

An iterator over substrings of the given string slice, separated by characters matched by a pattern.

The pattern can be any type that implements the Pattern trait. Notable examples are &str, char, and closures that determines the split.

Equivalent to split, except that the trailing substring is skipped if empty.

This method can be used for string data that is terminated, rather than separated by a pattern.

Iterator behavior

The returned iterator will be a DoubleEndedIterator if the pattern allows a reverse search and forward/reverse search yields the same elements. This is true for, e.g., char, but not for &str.

If the pattern allows a reverse search but its results might differ from a forward search, the rsplit_terminator method can be used.

Examples

Basic usage:

let v: Vec<&str> = "A.B.".split_terminator('.').collect();
assert_eq!(v, ["A", "B"]);

let v: Vec<&str> = "A..B..".split_terminator(".").collect();
assert_eq!(v, ["A", "", "B", ""]);

Important traits for RSplitTerminator<'a, P>

impl<'a, P> Iterator for RSplitTerminator<'a, P> where
    P: Pattern<'a>,
    <P as Pattern<'a>>::Searcher: ReverseSearcher<'a>,  type Item = &'a str;

pub fn rsplit_terminator<'a, P>(&'a self, pat: P) -> RSplitTerminator<'a, P> where
    P: Pattern<'a>,
    <P as Pattern<'a>>::Searcher: ReverseSearcher<'a>, 

An iterator over substrings of self, separated by characters matched by a pattern and yielded in reverse order.

The pattern can be any type that implements the Pattern trait. Notable examples are &str, char, and closures that determines the split. Additional libraries might provide more complex patterns like regular expressions.

Equivalent to split, except that the trailing substring is skipped if empty.

This method can be used for string data that is terminated, rather than separated by a pattern.

Iterator behavior

The returned iterator requires that the pattern supports a reverse search, and it will be double ended if a forward/reverse search yields the same elements.

For iterating from the front, the split_terminator method can be used.

Examples

let v: Vec<&str> = "A.B.".rsplit_terminator('.').collect();
assert_eq!(v, ["B", "A"]);

let v: Vec<&str> = "A..B..".rsplit_terminator(".").collect();
assert_eq!(v, ["", "B", "", "A"]);

Important traits for SplitN<'a, P>

impl<'a, P> Iterator for SplitN<'a, P> where
    P: Pattern<'a>,  type Item = &'a str;

pub fn splitn<'a, P>(&'a self, n: usize, pat: P) -> SplitN<'a, P> where
    P: Pattern<'a>, 

An iterator over substrings of the given string slice, separated by a pattern, restricted to returning at most n items.

If n substrings are returned, the last substring (the nth substring) will contain the remainder of the string.

The pattern can be any type that implements the Pattern trait. Notable examples are &str, char, and closures that determines the split.

Iterator behavior

The returned iterator will not be double ended, because it is not efficient to support.

If the pattern allows a reverse search, the rsplitn method can be used.

Examples

Simple patterns:

let v: Vec<&str> = "Mary had a little lambda".splitn(3, ' ').collect();
assert_eq!(v, ["Mary", "had", "a little lambda"]);

let v: Vec<&str> = "lionXXtigerXleopard".splitn(3, "X").collect();
assert_eq!(v, ["lion", "", "tigerXleopard"]);

let v: Vec<&str> = "abcXdef".splitn(1, 'X').collect();
assert_eq!(v, ["abcXdef"]);

let v: Vec<&str> = "".splitn(1, 'X').collect();
assert_eq!(v, [""]);

A more complex pattern, using a closure:

let v: Vec<&str> = "abc1defXghi".splitn(2, |c| c == '1' || c == 'X').collect();
assert_eq!(v, ["abc", "defXghi"]);

Important traits for RSplitN<'a, P>

impl<'a, P> Iterator for RSplitN<'a, P> where
    P: Pattern<'a>,
    <P as Pattern<'a>>::Searcher: ReverseSearcher<'a>,  type Item = &'a str;

pub fn rsplitn<'a, P>(&'a self, n: usize, pat: P) -> RSplitN<'a, P> where
    P: Pattern<'a>,
    <P as Pattern<'a>>::Searcher: ReverseSearcher<'a>, 

An iterator over substrings of this string slice, separated by a pattern, starting from the end of the string, restricted to returning at most n items.

If n substrings are returned, the last substring (the nth substring) will contain the remainder of the string.

The pattern can be any type that implements the Pattern trait. Notable examples are &str, char, and closures that determines the split.

Iterator behavior

The returned iterator will not be double ended, because it is not efficient to support.

For splitting from the front, the splitn method can be used.

Examples

Simple patterns:

let v: Vec<&str> = "Mary had a little lamb".rsplitn(3, ' ').collect();
assert_eq!(v, ["lamb", "little", "Mary had a"]);

let v: Vec<&str> = "lionXXtigerXleopard".rsplitn(3, 'X').collect();
assert_eq!(v, ["leopard", "tiger", "lionX"]);

let v: Vec<&str> = "lion::tiger::leopard".rsplitn(2, "::").collect();
assert_eq!(v, ["leopard", "lion::tiger"]);

A more complex pattern, using a closure:

let v: Vec<&str> = "abc1defXghi".rsplitn(2, |c| c == '1' || c == 'X').collect();
assert_eq!(v, ["ghi", "abc1def"]);

Important traits for Matches<'a, P>

impl<'a, P> Iterator for Matches<'a, P> where
    P: Pattern<'a>,  type Item = &'a str;

pub fn matches<'a, P>(&'a self, pat: P) -> Matches<'a, P> where
    P: Pattern<'a>, 

An iterator over the disjoint matches of a pattern within the given string slice.

The pattern can be any type that implements the Pattern trait. Notable examples are &str, char, and closures that determines the split.

Iterator behavior

The returned iterator will be a DoubleEndedIterator if the pattern allows a reverse search and forward/reverse search yields the same elements. This is true for, e.g., char, but not for &str.

If the pattern allows a reverse search but its results might differ from a forward search, the rmatches method can be used.

Examples

Basic usage:

let v: Vec<&str> = "abcXXXabcYYYabc".matches("abc").collect();
assert_eq!(v, ["abc", "abc", "abc"]);

let v: Vec<&str> = "1abc2abc3".matches(char::is_numeric).collect();
assert_eq!(v, ["1", "2", "3"]);

Important traits for RMatches<'a, P>

impl<'a, P> Iterator for RMatches<'a, P> where
    P: Pattern<'a>,
    <P as Pattern<'a>>::Searcher: ReverseSearcher<'a>,  type Item = &'a str;

pub fn rmatches<'a, P>(&'a self, pat: P) -> RMatches<'a, P> where
    P: Pattern<'a>,
    <P as Pattern<'a>>::Searcher: ReverseSearcher<'a>, 

An iterator over the disjoint matches of a pattern within this string slice, yielded in reverse order.

The pattern can be a &str, char, or a closure that determines if a character matches.

Iterator behavior

The returned iterator requires that the pattern supports a reverse search, and it will be a DoubleEndedIterator if a forward/reverse search yields the same elements.

For iterating from the front, the matches method can be used.

Examples

Basic usage:

let v: Vec<&str> = "abcXXXabcYYYabc".rmatches("abc").collect();
assert_eq!(v, ["abc", "abc", "abc"]);

let v: Vec<&str> = "1abc2abc3".rmatches(char::is_numeric).collect();
assert_eq!(v, ["3", "2", "1"]);

Important traits for MatchIndices<'a, P>

impl<'a, P> Iterator for MatchIndices<'a, P> where
    P: Pattern<'a>,  type Item = (usize, &'a str);

pub fn match_indices<'a, P>(&'a self, pat: P) -> MatchIndices<'a, P> where
    P: Pattern<'a>, 

An iterator over the disjoint matches of a pattern within this string slice as well as the index that the match starts at.

For matches of pat within self that overlap, only the indices corresponding to the first match are returned.

The pattern can be a &str, char, or a closure that determines if a character matches.

Iterator behavior

The returned iterator will be a DoubleEndedIterator if the pattern allows a reverse search and forward/reverse search yields the same elements. This is true for, e.g., char, but not for &str.

If the pattern allows a reverse search but its results might differ from a forward search, the rmatch_indices method can be used.

Examples

Basic usage:

let v: Vec<_> = "abcXXXabcYYYabc".match_indices("abc").collect();
assert_eq!(v, [(0, "abc"), (6, "abc"), (12, "abc")]);

let v: Vec<_> = "1abcabc2".match_indices("abc").collect();
assert_eq!(v, [(1, "abc"), (4, "abc")]);

let v: Vec<_> = "ababa".match_indices("aba").collect();
assert_eq!(v, [(0, "aba")]); // only the first `aba`

Important traits for RMatchIndices<'a, P>

impl<'a, P> Iterator for RMatchIndices<'a, P> where
    P: Pattern<'a>,
    <P as Pattern<'a>>::Searcher: ReverseSearcher<'a>,  type Item = (usize, &'a str);

pub fn rmatch_indices<'a, P>(&'a self, pat: P) -> RMatchIndices<'a, P> where
    P: Pattern<'a>,
    <P as Pattern<'a>>::Searcher: ReverseSearcher<'a>, 

An iterator over the disjoint matches of a pattern within self, yielded in reverse order along with the index of the match.

For matches of pat within self that overlap, only the indices corresponding to the last match are returned.

The pattern can be a &str, char, or a closure that determines if a character matches.

Iterator behavior

The returned iterator requires that the pattern supports a reverse search, and it will be a DoubleEndedIterator if a forward/reverse search yields the same elements.

For iterating from the front, the match_indices method can be used.

Examples

Basic usage:

let v: Vec<_> = "abcXXXabcYYYabc".rmatch_indices("abc").collect();
assert_eq!(v, [(12, "abc"), (6, "abc"), (0, "abc")]);

let v: Vec<_> = "1abcabc2".rmatch_indices("abc").collect();
assert_eq!(v, [(4, "abc"), (1, "abc")]);

let v: Vec<_> = "ababa".rmatch_indices("aba").collect();
assert_eq!(v, [(2, "aba")]); // only the last `aba`

#[must_use = "this returns the trimmed string as a slice, without modifying the original"] pub fn trim(&self) -> &str

Returns a string slice with leading and trailing whitespace removed.

'Whitespace' is defined according to the terms of the Unicode Derived Core Property White_Space.

Examples

Basic usage:

let s = " Hello\tworld\t";

assert_eq!("Hello\tworld", s.trim());

#[must_use = "this returns the trimmed string as a new slice, without modifying the original"] pub fn trim_start(&self) -> &str

Returns a string slice with leading whitespace removed.

'Whitespace' is defined according to the terms of the Unicode Derived Core Property White_Space.

Text directionality

A string is a sequence of bytes. start in this context means the first position of that byte string; for a left-to-right language like English or Russian, this will be left side, and for right-to-left languages like Arabic or Hebrew, this will be the right side.

Examples

Basic usage:

let s = " Hello\tworld\t";
assert_eq!("Hello\tworld\t", s.trim_start());

Directionality:

let s = "  English  ";
assert!(Some('E') == s.trim_start().chars().next());

let s = "  עברית  ";
assert!(Some('ע') == s.trim_start().chars().next());

#[must_use = "this returns the trimmed string as a new slice, without modifying the original"] pub fn trim_end(&self) -> &str

Returns a string slice with trailing whitespace removed.

'Whitespace' is defined according to the terms of the Unicode Derived Core Property White_Space.

Text directionality

A string is a sequence of bytes. end in this context means the last position of that byte string; for a left-to-right language like English or Russian, this will be right side, and for right-to-left languages like Arabic or Hebrew, this will be the left side.

Examples

Basic usage:

let s = " Hello\tworld\t";
assert_eq!(" Hello\tworld", s.trim_end());

Directionality:

let s = "  English  ";
assert!(Some('h') == s.trim_end().chars().rev().next());

let s = "  עברית  ";
assert!(Some('ת') == s.trim_end().chars().rev().next());

pub fn trim_left(&self) -> &str

Deprecated since 1.33.0:

superseded by trim_start

Returns a string slice with leading whitespace removed.

'Whitespace' is defined according to the terms of the Unicode Derived Core Property White_Space.

Text directionality

A string is a sequence of bytes. 'Left' in this context means the first position of that byte string; for a language like Arabic or Hebrew which are 'right to left' rather than 'left to right', this will be the right side, not the left.

Examples

Basic usage:

let s = " Hello\tworld\t";

assert_eq!("Hello\tworld\t", s.trim_left());

Directionality:

let s = "  English";
assert!(Some('E') == s.trim_left().chars().next());

let s = "  עברית";
assert!(Some('ע') == s.trim_left().chars().next());

pub fn trim_right(&self) -> &str

Deprecated since 1.33.0:

superseded by trim_end

Returns a string slice with trailing whitespace removed.

'Whitespace' is defined according to the terms of the Unicode Derived Core Property White_Space.

Text directionality

A string is a sequence of bytes. 'Right' in this context means the last position of that byte string; for a language like Arabic or Hebrew which are 'right to left' rather than 'left to right', this will be the left side, not the right.

Examples

Basic usage:

let s = " Hello\tworld\t";

assert_eq!(" Hello\tworld", s.trim_right());

Directionality:

let s = "English  ";
assert!(Some('h') == s.trim_right().chars().rev().next());

let s = "עברית  ";
assert!(Some('ת') == s.trim_right().chars().rev().next());

#[must_use = "this returns the trimmed string as a new slice, without modifying the original"] pub fn trim_matches<'a, P>(&'a self, pat: P) -> &'a str where
    P: Pattern<'a>,
    <P as Pattern<'a>>::Searcher: DoubleEndedSearcher<'a>, 

Returns a string slice with all prefixes and suffixes that match a pattern repeatedly removed.

The pattern can be a char or a closure that determines if a character matches.

Examples

Simple patterns:

assert_eq!("11foo1bar11".trim_matches('1'), "foo1bar");
assert_eq!("123foo1bar123".trim_matches(char::is_numeric), "foo1bar");

let x: &[_] = &['1', '2'];
assert_eq!("12foo1bar12".trim_matches(x), "foo1bar");

A more complex pattern, using a closure:

assert_eq!("1foo1barXX".trim_matches(|c| c == '1' || c == 'X'), "foo1bar");

#[must_use = "this returns the trimmed string as a new slice, without modifying the original"] pub fn trim_start_matches<'a, P>(&'a self, pat: P) -> &'a str where
    P: Pattern<'a>, 

Returns a string slice with all prefixes that match a pattern repeatedly removed.

The pattern can be a &str, char, or a closure that determines if a character matches.

Text directionality

A string is a sequence of bytes. start in this context means the first position of that byte string; for a left-to-right language like English or Russian, this will be left side, and for right-to-left languages like Arabic or Hebrew, this will be the right side.

Examples

Basic usage:

assert_eq!("11foo1bar11".trim_start_matches('1'), "foo1bar11");
assert_eq!("123foo1bar123".trim_start_matches(char::is_numeric), "foo1bar123");

let x: &[_] = &['1', '2'];
assert_eq!("12foo1bar12".trim_start_matches(x), "foo1bar12");

#[must_use = "this returns the trimmed string as a new slice, without modifying the original"] pub fn trim_end_matches<'a, P>(&'a self, pat: P) -> &'a str where
    P: Pattern<'a>,
    <P as Pattern<'a>>::Searcher: ReverseSearcher<'a>, 

Returns a string slice with all suffixes that match a pattern repeatedly removed.

The pattern can be a &str, char, or a closure that determines if a character matches.

Text directionality

A string is a sequence of bytes. end in this context means the last position of that byte string; for a left-to-right language like English or Russian, this will be right side, and for right-to-left languages like Arabic or Hebrew, this will be the left side.

Examples

Simple patterns:

assert_eq!("11foo1bar11".trim_end_matches('1'), "11foo1bar");
assert_eq!("123foo1bar123".trim_end_matches(char::is_numeric), "123foo1bar");

let x: &[_] = &['1', '2'];
assert_eq!("12foo1bar12".trim_end_matches(x), "12foo1bar");

A more complex pattern, using a closure:

assert_eq!("1fooX".trim_end_matches(|c| c == '1' || c == 'X'), "1foo");

pub fn trim_left_matches<'a, P>(&'a self, pat: P) -> &'a str where
    P: Pattern<'a>, 

Deprecated since 1.33.0:

superseded by trim_start_matches

Returns a string slice with all prefixes that match a pattern repeatedly removed.

The pattern can be a &str, char, or a closure that determines if a character matches.

Text directionality

A string is a sequence of bytes. 'Left' in this context means the first position of that byte string; for a language like Arabic or Hebrew which are 'right to left' rather than 'left to right', this will be the right side, not the left.

Examples

Basic usage:

assert_eq!("11foo1bar11".trim_left_matches('1'), "foo1bar11");
assert_eq!("123foo1bar123".trim_left_matches(char::is_numeric), "foo1bar123");

let x: &[_] = &['1', '2'];
assert_eq!("12foo1bar12".trim_left_matches(x), "foo1bar12");

pub fn trim_right_matches<'a, P>(&'a self, pat: P) -> &'a str where
    P: Pattern<'a>,
    <P as Pattern<'a>>::Searcher: ReverseSearcher<'a>, 

Deprecated since 1.33.0:

superseded by trim_end_matches

Returns a string slice with all suffixes that match a pattern repeatedly removed.

The pattern can be a &str, char, or a closure that determines if a character matches.

Text directionality

A string is a sequence of bytes. 'Right' in this context means the last position of that byte string; for a language like Arabic or Hebrew which are 'right to left' rather than 'left to right', this will be the left side, not the right.

Examples

Simple patterns:

assert_eq!("11foo1bar11".trim_right_matches('1'), "11foo1bar");
assert_eq!("123foo1bar123".trim_right_matches(char::is_numeric), "123foo1bar");

let x: &[_] = &['1', '2'];
assert_eq!("12foo1bar12".trim_right_matches(x), "12foo1bar");

A more complex pattern, using a closure:

assert_eq!("1fooX".trim_right_matches(|c| c == '1' || c == 'X'), "1foo");

pub fn parse<F>(&self) -> Result<F, <F as FromStr>::Err> where
    F: FromStr, 

Parses this string slice into another type.

Because parse is so general, it can cause problems with type inference. As such, parse is one of the few times you'll see the syntax affectionately known as the 'turbofish': ::<>. This helps the inference algorithm understand specifically which type you're trying to parse into.

parse can parse any type that implements the FromStr trait.

Errors

Will return Err if it's not possible to parse this string slice into the desired type.

Examples

Basic usage

let four: u32 = "4".parse().unwrap();

assert_eq!(4, four);

Using the 'turbofish' instead of annotating four:

let four = "4".parse::<u32>();

assert_eq!(Ok(4), four);

Failing to parse:

let nope = "j".parse::<u32>();

assert!(nope.is_err());

pub fn is_ascii(&self) -> bool

Checks if all characters in this string are within the ASCII range.

Examples

let ascii = "hello!\n";
let non_ascii = "Grüße, Jürgen ❤";

assert!(ascii.is_ascii());
assert!(!non_ascii.is_ascii());

pub fn eq_ignore_ascii_case(&self, other: &str) -> bool

Checks that two strings are an ASCII case-insensitive match.

Same as to_ascii_lowercase(a) == to_ascii_lowercase(b), but without allocating and copying temporaries.

Examples

assert!("Ferris".eq_ignore_ascii_case("FERRIS"));
assert!("Ferrös".eq_ignore_ascii_case("FERRöS"));
assert!(!"Ferrös".eq_ignore_ascii_case("FERRÖS"));

pub fn make_ascii_uppercase(&mut self)

Converts this string to its ASCII upper case equivalent in-place.

ASCII letters 'a' to 'z' are mapped to 'A' to 'Z', but non-ASCII letters are unchanged.

To return a new uppercased value without modifying the existing one, use to_ascii_uppercase.

Examples

let mut s = String::from("Grüße, Jürgen ❤");

s.make_ascii_uppercase();

assert_eq!("GRüßE, JüRGEN ❤", s);

pub fn make_ascii_lowercase(&mut self)

Converts this string to its ASCII lower case equivalent in-place.

ASCII letters 'A' to 'Z' are mapped to 'a' to 'z', but non-ASCII letters are unchanged.

To return a new lowercased value without modifying the existing one, use to_ascii_lowercase.

Examples

let mut s = String::from("GRÜßE, JÜRGEN ❤");

s.make_ascii_lowercase();

assert_eq!("grÜße, jÜrgen ❤", s);

Important traits for EscapeDebug<'a>

impl<'a> Iterator for EscapeDebug<'a> type Item = char;

pub fn escape_debug(&self) -> EscapeDebug

Return an iterator that escapes each char in self with char::escape_debug.

Note: only extended grapheme codepoints that begin the string will be escaped.

Examples

As an iterator:

for c in "❤\n!".escape_debug() {
    print!("{}", c);
}
println!();

Using println! directly:

println!("{}", "❤\n!".escape_debug());

Both are equivalent to:

println!("❤\\n!");

Using to_string:

assert_eq!("❤\n!".escape_debug().to_string(), "❤\\n!");

Important traits for EscapeDefault<'a>

impl<'a> Iterator for EscapeDefault<'a> type Item = char;

pub fn escape_default(&self) -> EscapeDefault

Return an iterator that escapes each char in self with char::escape_default.

Examples

As an iterator:

for c in "❤\n!".escape_default() {
    print!("{}", c);
}
println!();

Using println! directly:

println!("{}", "❤\n!".escape_default());

Both are equivalent to:

println!("\\u{{2764}}\\n!");

Using to_string:

assert_eq!("❤\n!".escape_default().to_string(), "\\u{2764}\\n!");

Important traits for EscapeUnicode<'a>

impl<'a> Iterator for EscapeUnicode<'a> type Item = char;

pub fn escape_unicode(&self) -> EscapeUnicode

Return an iterator that escapes each char in self with char::escape_unicode.

Examples

As an iterator:

for c in "❤\n!".escape_unicode() {
    print!("{}", c);
}
println!();

Using println! directly:

println!("{}", "❤\n!".escape_unicode());

Both are equivalent to:

println!("\\u{{2764}}\\u{{a}}\\u{{21}}");

Using to_string:

assert_eq!("❤\n!".escape_unicode().to_string(), "\\u{2764}\\u{a}\\u{21}");

impl str

Methods for string slices.

Important traits for Box<I>

impl<I> Iterator for Box<I> where
    I: Iterator, impl<I> Iterator for Box<I> where
    I: Iterator + ?Sized,  type Item = <I as Iterator>::Item;impl<F> Future for Box<F> where
    F: Unpin + Future + ?Sized,  type Output = <F as Future>::Output;impl<R: Read + ?Sized> Read for Box<R>impl<W: Write + ?Sized> Write for Box<W>

pub fn into_boxed_bytes(self: Box<str>) -> Box<[u8]>

Converts a Box<str> into a Box<[u8]> without copying or allocating.

Examples

Basic usage:

let s = "this is a string";
let boxed_str = s.to_owned().into_boxed_str();
let boxed_bytes = boxed_str.into_boxed_bytes();
assert_eq!(*boxed_bytes, *s.as_bytes());

#[must_use = "this returns the replaced string as a new allocation, without modifying the original"] pub fn replace<'a, P>(&'a self, from: P, to: &str) -> String where
    P: Pattern<'a>, 

Replaces all matches of a pattern with another string.

replace creates a new String, and copies the data from this string slice into it. While doing so, it attempts to find matches of a pattern. If it finds any, it replaces them with the replacement string slice.

Examples

Basic usage:

let s = "this is old";

assert_eq!("this is new", s.replace("old", "new"));

When the pattern doesn't match:

let s = "this is old";
assert_eq!(s, s.replace("cookie monster", "little lamb"));

#[must_use = "this returns the replaced string as a new allocation, without modifying the original"] pub fn replacen<'a, P>(&'a self, pat: P, to: &str, count: usize) -> String where
    P: Pattern<'a>, 

Replaces first N matches of a pattern with another string.

replacen creates a new String, and copies the data from this string slice into it. While doing so, it attempts to find matches of a pattern. If it finds any, it replaces them with the replacement string slice at most count times.

Examples

Basic usage:

let s = "foo foo 123 foo";
assert_eq!("new new 123 foo", s.replacen("foo", "new", 2));
assert_eq!("faa fao 123 foo", s.replacen('o', "a", 3));
assert_eq!("foo foo new23 foo", s.replacen(char::is_numeric, "new", 1));

When the pattern doesn't match:

let s = "this is old";
assert_eq!(s, s.replacen("cookie monster", "little lamb", 10));

pub fn to_lowercase(&self) -> String

Returns the lowercase equivalent of this string slice, as a new String.

'Lowercase' is defined according to the terms of the Unicode Derived Core Property Lowercase.

Since some characters can expand into multiple characters when changing the case, this function returns a String instead of modifying the parameter in-place.

Examples

Basic usage:

let s = "HELLO";

assert_eq!("hello", s.to_lowercase());

A tricky example, with sigma:

let sigma = "Σ";

assert_eq!("σ", sigma.to_lowercase());

// but at the end of a word, it's ς, not σ:
let odysseus = "ὈΔΥΣΣΕΎΣ";

assert_eq!("ὀδυσσεύς", odysseus.to_lowercase());

Languages without case are not changed:

let new_year = "农历新年";

assert_eq!(new_year, new_year.to_lowercase());

pub fn to_uppercase(&self) -> String

Returns the uppercase equivalent of this string slice, as a new String.

'Uppercase' is defined according to the terms of the Unicode Derived Core Property Uppercase.

Since some characters can expand into multiple characters when changing the case, this function returns a String instead of modifying the parameter in-place.

Examples

Basic usage:

let s = "hello";

assert_eq!("HELLO", s.to_uppercase());

Scripts without case are not changed:

let new_year = "农历新年";

assert_eq!(new_year, new_year.to_uppercase());

One character can become multiple:

let s = "tschüß";

assert_eq!("TSCHÜSS", s.to_uppercase());

pub fn into_string(self: Box<str>) -> String

Converts a Box<str> into a String without copying or allocating.

Examples

Basic usage:

let string = String::from("birthday gift");
let boxed_str = string.clone().into_boxed_str();

assert_eq!(boxed_str.into_string(), string);

pub fn repeat(&self, n: usize) -> String

Creates a new String by repeating a string n times.

Panics

This function will panic if the capacity would overflow.

Examples

Basic usage:

assert_eq!("abc".repeat(4), String::from("abcabcabcabc"));

A panic upon overflow:

fn main() {
    // this will panic at runtime
    "0123456789abcdef".repeat(usize::max_value());
}

pub fn to_ascii_uppercase(&self) -> String

Returns a copy of this string where each character is mapped to its ASCII upper case equivalent.

ASCII letters 'a' to 'z' are mapped to 'A' to 'Z', but non-ASCII letters are unchanged.

To uppercase the value in-place, use make_ascii_uppercase.

To uppercase ASCII characters in addition to non-ASCII characters, use to_uppercase.

Examples

let s = "Grüße, Jürgen ❤";

assert_eq!("GRüßE, JüRGEN ❤", s.to_ascii_uppercase());

pub fn to_ascii_lowercase(&self) -> String

Returns a copy of this string where each character is mapped to its ASCII lower case equivalent.

ASCII letters 'A' to 'Z' are mapped to 'a' to 'z', but non-ASCII letters are unchanged.

To lowercase the value in-place, use make_ascii_lowercase.

To lowercase ASCII characters in addition to non-ASCII characters, use to_lowercase.

Examples

let s = "Grüße, Jürgen ❤";

assert_eq!("grüße, jürgen ❤", s.to_ascii_lowercase());

Trait Implementations

impl<'a, 'b> Pattern<'a> for &'b str

Non-allocating substring search.

Will handle the pattern "" as returning empty matches at each character boundary.

type Searcher = StrSearcher<'a, 'b>

🔬 This is a nightly-only experimental API. (pattern #27721)

API not fully fleshed out and ready to be stabilized

Associated searcher for this pattern

fn into_searcher(self, haystack: &'a str) -> StrSearcher<'a, 'b>

🔬 This is a nightly-only experimental API. (pattern #27721)

API not fully fleshed out and ready to be stabilized

Constructs the associated searcher from self and the haystack to search in.

fn is_prefix_of(self, haystack: &'a str) -> bool

🔬 This is a nightly-only experimental API. (pattern #27721)

API not fully fleshed out and ready to be stabilized

Checks whether the pattern matches at the front of the haystack

fn is_suffix_of(self, haystack: &'a str) -> bool

🔬 This is a nightly-only experimental API. (pattern #27721)

API not fully fleshed out and ready to be stabilized

Checks whether the pattern matches at the back of the haystack

fn is_contained_in(self, haystack: &'a str) -> bool

🔬 This is a nightly-only experimental API. (pattern #27721)

API not fully fleshed out and ready to be stabilized

Checks whether the pattern matches anywhere in the haystack

impl Display for str

fn fmt(&self, f: &mut Formatter) -> Result<(), Error>

Formats the value using the given formatter.

impl AsRef<[u8]> for str

Important traits for &'_ [u8]

impl<'_> Read for &'_ [u8]impl<'_> Write for &'_ mut [u8]

fn as_ref(&self) -> &[u8]

Performs the conversion.

impl AsRef<str> for str

fn as_ref(&self) -> &str

Performs the conversion.

impl Eq for str

impl Debug for str

fn fmt(&self, f: &mut Formatter) -> Result<(), Error>

Formats the value using the given formatter.

impl PartialEq<str> for str

fn eq(&self, other: &str) -> bool

This method tests for self and other values to be equal, and is used by ==.

fn ne(&self, other: &str) -> bool

This method tests for !=.

impl<I> IndexMut<I> for str where
    I: SliceIndex<str>, 

fn index_mut(&mut self, index: I) -> &mut <I as SliceIndex<str>>::Output

Performs the mutable indexing (container[index]) operation.

impl PartialOrd<str> for str

Implements comparison operations on strings.

Strings are compared lexicographically by their byte values. This compares Unicode code points based on their positions in the code charts. This is not necessarily the same as "alphabetical" order, which varies by language and locale. Comparing strings according to culturally-accepted standards requires locale-specific data that is outside the scope of the str type.

fn partial_cmp(&self, other: &str) -> Option<Ordering>

This method returns an ordering between self and other values if one exists.

#[must_use] fn lt(&self, other: &Rhs) -> bool

This method tests less than (for self and other) and is used by the < operator.

#[must_use] fn le(&self, other: &Rhs) -> bool

This method tests less than or equal to (for self and other) and is used by the <= operator.

#[must_use] fn gt(&self, other: &Rhs) -> bool

This method tests greater than (for self and other) and is used by the > operator.

#[must_use] fn ge(&self, other: &Rhs) -> bool

This method tests greater than or equal to (for self and other) and is used by the >= operator.

impl Hash for str

fn hash<H>(&self, state: &mut H) where
    H: Hasher, 

Feeds this value into the given [Hasher].

fn hash_slice<H>(data: &[Self], state: &mut H) where
    H: Hasher, 

Feeds a slice of this type into the given [Hasher].

impl Ord for str

Implements ordering of strings.

Strings are ordered lexicographically by their byte values. This orders Unicode code points based on their positions in the code charts. This is not necessarily the same as "alphabetical" order, which varies by language and locale. Sorting strings according to culturally-accepted standards requires locale-specific data that is outside the scope of the str type.

fn cmp(&self, other: &str) -> Ordering

This method returns an Ordering between self and other.

fn max(self, other: Self) -> Self

Compares and returns the maximum of two values.

fn min(self, other: Self) -> Self

Compares and returns the minimum of two values.

fn clamp(self, min: Self, max: Self) -> Self

🔬 This is a nightly-only experimental API. (clamp #44095)

Restrict a value to a certain interval.

impl<I> Index<I> for str where
    I: SliceIndex<str>, 

type Output = <I as SliceIndex<str>>::Output

The returned type after indexing.

fn index(&self, index: I) -> &<I as SliceIndex<str>>::Output

Performs the indexing (container[index]) operation.

impl<'_> Default for &'_ mut str

fn default() -> &'_ mut str

Creates an empty mutable str

impl<'_> Default for &'_ str

fn default() -> &'_ str

Creates an empty str

impl<'a, 'b> PartialEq<Cow<'a, str>> for str

fn eq(&self, other: &Cow<'a, str>) -> bool

This method tests for self and other values to be equal, and is used by ==.

fn ne(&self, other: &Cow<'a, str>) -> bool

This method tests for !=.

impl<'a, 'b> PartialEq<String> for str

fn eq(&self, other: &String) -> bool

This method tests for self and other values to be equal, and is used by ==.

fn ne(&self, other: &String) -> bool

This method tests for !=.

impl<'a, 'b> PartialEq<Cow<'a, str>> for &'b str

fn eq(&self, other: &Cow<'a, str>) -> bool

This method tests for self and other values to be equal, and is used by ==.

fn ne(&self, other: &Cow<'a, str>) -> bool

This method tests for !=.

impl<'a, 'b> PartialEq<String> for &'a str

fn eq(&self, other: &String) -> bool

This method tests for self and other values to be equal, and is used by ==.

fn ne(&self, other: &String) -> bool

This method tests for !=.

impl ToString for str

fn to_string(&self) -> String

Converts the given value to a String.

impl ToOwned for str

type Owned = String

The resulting type after obtaining ownership.

fn to_owned(&self) -> String

Creates owned data from borrowed data, usually by cloning.

fn clone_into(&self, target: &mut String)

🔬 This is a nightly-only experimental API. (toowned_clone_into #41263)

recently added

Uses borrowed data to replace owned data, usually by cloning.

impl AsciiExt for str

type Owned = String

Deprecated since 1.26.0:

use inherent methods instead

Container type for copied ASCII characters.

fn is_ascii(&self) -> bool

Deprecated since 1.26.0:

use inherent methods instead

Checks if the value is within the ASCII range.

fn to_ascii_uppercase(&self) -> Self::Owned

Deprecated since 1.26.0:

use inherent methods instead

Makes a copy of the value in its ASCII upper case equivalent.

fn to_ascii_lowercase(&self) -> Self::Owned

Deprecated since 1.26.0:

use inherent methods instead

Makes a copy of the value in its ASCII lower case equivalent.

fn eq_ignore_ascii_case(&self, o: &Self) -> bool

Deprecated since 1.26.0:

use inherent methods instead

Checks that two values are an ASCII case-insensitive match.

fn make_ascii_uppercase(&mut self)

Deprecated since 1.26.0:

use inherent methods instead

Converts this type to its ASCII upper case equivalent in-place.

fn make_ascii_lowercase(&mut self)

Deprecated since 1.26.0:

use inherent methods instead

Converts this type to its ASCII lower case equivalent in-place.

impl ToSocketAddrs for str

type Iter = IntoIter<SocketAddr>

Returned iterator over socket addresses which this type may correspond to.

fn to_socket_addrs(&self) -> Result<IntoIter<SocketAddr>>

Converts this object to an iterator of resolved SocketAddrs.

impl PartialEq<OsString> for str

fn eq(&self, other: &OsString) -> bool

This method tests for self and other values to be equal, and is used by ==.

#[must_use] fn ne(&self, other: &Rhs) -> bool

This method tests for !=.

impl<'a> PartialEq<OsString> for &'a str

fn eq(&self, other: &OsString) -> bool

This method tests for self and other values to be equal, and is used by ==.

#[must_use] fn ne(&self, other: &Rhs) -> bool

This method tests for !=.

impl PartialEq<OsStr> for str

fn eq(&self, other: &OsStr) -> bool

This method tests for self and other values to be equal, and is used by ==.

#[must_use] fn ne(&self, other: &Rhs) -> bool

This method tests for !=.

impl AsRef<OsStr> for str

fn as_ref(&self) -> &OsStr

Performs the conversion.

impl AsRef<Path> for str

fn as_ref(&self) -> &Path

Performs the conversion.